The Forth Rail Bridge
miniature coal model figure - made with deep mined british coal
Se others in
- Buildings & Places Models
- Historical Figures
- Model Bridges
This distinctive coal model The Forth Rail Bridge - made with coal - is a beautiful in detail - it would compliment any collection of coal figures
|
The Forth Rail Bridge
|
The Forth Rail Bridge Made from deep mined coal and mixed with designer resin to provide a strong and durable model, finished with a fine coat of lacquer for protection
The Forth Rail Bridge will provide a remarkable addition to the collection of any Coal mining enthusiast
|
| Availability :
In stock - normally despatched within 24hrs
|
|
Our stock code : CR1215 |
Dimensions (measured at the widest points) Approx.
- Length 27.50 (cm) About
10 3/4 (inches) left to right
- Height 7.50 (cm) About
3
(inches) top to bottom
- Width 6.00 (cm) About
2 1/2
(inches) front to back
|
|
|
The Forth Rail Bridge
One of the most spectacular man-made landmarks in Scotland is the Forth Rail Bridge.
This solid cantilever bridge, built by Sir William Arrol, was opened in 1890.
The bridge crosses the River Forth between South Queensferry and North Queensferry, and still carries the East Coast mainline railway north from Edinburgh to Perth and Dundee.
Completed in 1890, the bridge was constructed from 54,000 tonnes of steel, 194,000 tonnes of stone and concrete, and in excess of 21,000 tonnes of cement. This was the largest steel bridge in the world, using approximately 7,500,000 rivets produced by The Clyde Rivet Company.
Success was not without its casualties and, throughout the course of construction, 57 men lost their lives.
[ Top of page ]
Other people interested in this product also looked at :
[ Top of page ]
Other people interested in this product also looked at :
|
